The Remote Connection Was Not Made Because The Name Of The Remote Access Server Did Not Resolve

The VPN server or your computer’s connection may be at fault if you see the error: “The remote connection was not formed because the name of the remote access server did not resolve” when attempting to connect.

In earlier versions of Windows, including Windows 7, a specific error code was assigned to this situation; in Windows 10, however, this code no longer exists.

Virtual private networks (VPNs) are becoming increasingly common, with some of us even using them exclusively. But if you’re in the middle of a VPN-related mistake, things might get pretty frustrating.

The Remote Connection Was Not Made Because The Name Of The Remote Access Server Did Not Resolve

But now you need not fret; this article will guide you through the various options available to you.
Rectifying the RDP Error and Its Causes Inability to resolve Remote Access Server Name

Read Also:

  1. Zam.Exe
  2. Bioshock Remastered Crashing
  3. Elden Ring White Screen Crash

Solutions to Fix RDP Error The Name of the Remote Access Server Did Not Resolve

From the feedback of users receiving the above-mentioned error message when using VPN. This problem has existed for a long time and can be seen from Windows 7 to Windows 10. Here, we have summed up some solutions to help you solve this problem.

Solution 1: Double-check the Hostname

First, make sure you have the correct hostname entered. As was previously mentioned, the hostname is the name of the device used to set up remote access. Make sure the name you’re using corresponds to the Hostname you entered when setting up the remote access.

In order to establish a VPN connection, double check that the hostname you gave is correct. You can also use the IP address of your server to connect to a VPN.

Solution 2: Turn off Windows Defender Firewall

Managing incoming and outgoing connections is the job of Windows Defender Firewall. Occasionally, Windows Defender Firewall will prevent you from connecting to your VPN.

It’s best to turn it off and see if the problem goes away if that’s the case. Follow these steps to turn off Windows Firewall:

Step 1: Select “Control Panel” from the Start menu.

Step 2: Chose Windows Defender Firewall after changing the View by setting to Bigger icons.

Step 3: Select “Turn Windows Defender Firewall on or off” from the menu on the left.

Step 4: Be sure that “Turn off Windows Defender Firewall” is selected in both the settings and the main window, and then click OK.

Step 5: Find out whether that fixes the problem.

Solution 3: Close Anti-Virus Software and Firewalls

The more you get, If you get an error saying that a remote connection could not be formed, your antivirus software or firewall may be to blame. This and other issues can sometimes be caused by third-party antivirus software that conflicts with Windows.

Turning off your antivirus software may be the solution to the issue you’re having. Disabling your antivirus software might be necessary if the problem persists. If all else fails, you might try operating without antivirus software to see if it helps.

It’s recommended to try a different antivirus programme if disabling the current one fixes the problem. You can select the perfect antivirus programme for your computer among the many accessible solutions.

If you are concerned about security but are unsure which third-party antivirus to choose, you may test out a few different choices without spending a dime.

Read Also:

  1. How Far Is Uvalde From San Antonio
  2. Reboot And Select Proper Boot Device
  3. Kernel Security Check Failure Windows 10


If you receive the error message “The remote connection was not formed because the name of the remote access server did not resolve,” try one of the seven solutions provided in this article.

How can I do remote control between two PCs that are on different networks if none of the aforementioned solutions work? If you want to remotely manage any computer, try the free AnyViewer programme.

Leave a Reply